|
O'MARA
SPECIFICATIONS
BIRCH SPECIFICATIONS
Standard Panel Dimensions:
47 ½” x 95”
47 ½” x 47 ½”
47 ½” x 23 ¾”
Height
from Floor to Surface:
With Masonite Base: 1 9/16”
Without Masonite Base: 1 7/16”
Weight
of Standard 47 ½” x 95” panel:
With Masonite Bases: 87 lbs. (4’ x 8’ panel)
Without Masonite Bases: 77 lbs. (4’ x 8’ panel)
Weight
of Standard 47 ½” x 47 ½” panel:
With Masonite Bases: 43 lbs.
Without Masonite Bases: 36 lbs.
Weight
of Standard 47 ½” x 23 ¾”
With Masonite Bases: 21 lbs.
Without Masonite Bases: 18 lbs.
Surface:
18 mm thirteen ply one piece birch face veneer plywood (FINDLAND BIRCH)
96” x 48” S/BB exterior in accordance with SFS 2413
Dimensions are precision machined.
Complies with PEFC certification
Finish
Options:
Sealed Only: Top and bottom sealed with (1)coat of commercial sealer,
¾” edges are
sealed with commercial urethane.
Slip Resistant Urethane Finish: Top and bottom sealed with commercial
sealer - (1) coat
bottom, (2) coats top. Top of panel sanded with 180 grit. Top of panel
- (2) coats
commercial urethane, 3/4” edge of panel (1) coat commercial urethane.
Suspension
Material:
2 pound density, closed cell cross-linked polyethylene foam blocks.
(32) suspension blocks per 4’ x 8’ panel.
Dimensions: ¾” thick x 3” x 3”
Tongue
and Groove System:
3/8” diameter cylindrical teflon or hardwood dowel, machined to
precise tolerances of + or .003” along length of ¾”
edge, less .875 at (4) corners.
Groove is precision machined 3/16” radius for accurate fit.
Transition
Ramps
Dimensions: 6” deep x 47 ½” wide.
Materials are the same as the O’Mara Sprung Floor Panels or comparable
material.
Cleats
(curbs):
8’ long x 1 ¾” wide x 1 5/8” thick.
Manufactured of poplar.
Sealed with black lacquer paint.
Standard
Carts for Moving and Storage of 4’ x 8’ Panels:
Dimensions: 98” long x 60” high x 39” wide with a 9 ¾’
ground clearance.
Weight: 250 Lbs. Fully loaded: 1,700 lbs, approximately.
Capacity: 18 full sized panels.
Manufactured with seamless, electro-welded, square steel tube.Primed
and painted with industrial grade enamel paint.
Casters
– Kingpinless design. Precision machined, induction hardened.
2 3/8” diameter raceway with 3/8” diameter carbon steel balls.
8” x 2” Poly/steel swivel.
1,000 lb. capacity per caster.
Specifications
subject to change due to availability of product.
Wood
is a natural product and has variation in color.
MAPLE
SPECIFICATIONS
Standard
Panel Dimensions:
47 ½” x 47 ½”
47½” x 23 ¾”
Height
from Floor to Surface:
With Masonite Base: 1 5/8”
Without Masonite Base: 1 ½”
Weight
of Standard Panel 47 ½” x 47 ½”:
With Masonite Bases: 40 lbs
Without Masonite Bases: 35 lbs.
Weight
of Standard Panel 47 ½” x 23 ¾”
With Masonite Bases: 20 Lbs.
Without Masonite Bases: 18 Lbs.
Panel
8 ply ¾” thick veneer panel. All plys are maple and are
approximately .090” thick.
# 1 hard maple face, whole pieces
Sound back, sound centers and sound crossbands
Grain running in long direction is hard maple.
Grain running in short direction is soft maple.
Dimensions are precision machined.
This panel has no core voids. Specifications exceed APA specifications.
Finish
Slip Resistant Urethaned Finish: Top and bottom sealed with commercial
sealer. (1) coat bottom (2) coats top.
Top of panel sanded with 180 grit.
Top of panel (2) coats commercial urethane,. 3/4” edge of panel
(1) coat commercial urethane.
Suspension Material:
2 pound density, closed cell cross-linked polyethylene foam blocks.
(16) suspension blocks per 4’ x 8’ panel.
Dimensions: ¾” thick x 3” x 3”
Tongue
and Groove System:
3/8” diameter cylindrical teflon or hardwood dowel, machined to
precise tolerances of + or .003” along length of ¾”
edge, less .875” at (4) corners.
Groove is precision machined 3/16” radius for accurate fit.
Transition
Ramps:
Dimensions: 6” deep x 47 ½” wide.
Materials are the same as the O’Mara Sprung Floor Panels or comparable
material.
Cleats
(curbs):
8’ long x 1 ¾” wide x 1 5/8” thick. (This is for
touring floors only.)
Manufactured of poplar.
Sealed with black lacquer paint.
Standard
Carts for Moving and Storage of 4’ x 4’ Panels:
Capacity: 18 panels.
Manufactured with seamless, electro-welded, square steel tube.
Primed and painted with industrial grade enamel paint.
Casters – Kingpin less design. Precision machined, induction hardened.
2 3/8” diameter raceway with 3/8” diameter carbon steel balls.
6” x 2” Poly/steel swivel.
Specifications
subject to change due to availability of product.
Wood
is natural product and has variation in color.
RETURN
TO HOMEPAGE
|
Portable
Dance Floor Systems for ANY Application. 
